If you paint with watercolors, you’ve likely tried out a butcher tray palette. Butcher tray palettes are usually made with steel or another metal, coated in a water resistant enamel or porcelain. They’re a great option, because they hold pigment well, don’t stain, and allow for easy mixing.
Many watercolorists leave pigments on their palette between sessions. As the colors dry out, they harden, and can be easily reconstituted the next time you sit down to paint.
If you leave your paints on a butcher tray for weeks or months, though, they might begin to harden. Once this happens, the pigments can be very hard to remove.
Here’s how to clean the enamel on a butcher tray palette.
Start by making sure that your pigments and colors aren’t toxic. Some watercolors are toxic, and you want to avoid cleaning these in a sink that you use for food prep, teeth brushing, etc. In general, you should use a utility or art sink for cleaning up pigments. Either way (but especially if your pigments are toxic), you’ll want to wear gloves for this cleaning step, so the pigments don’t stain you hands.
You also want to make sure your sink can handle the pigments without staining. Again, a plastic utility sink works great.
Turn the water on as hot as you can. Thoroughly wet the stuck on paints. You’ll see that a lot of pigment starts to wash away immediately, assuming your water is hot enough.
Make sure not to scald your hands. Work the water across each piece of stuck-on pigment, until they’re all soaked. The colorful runoff water looks pretty trippy, actually!
Next, leave a little water on the tray, and grab a small sponge with a scrubber. Scrub away at each piece of stuck-on pigment to begin to release it. Use bursts of water to wash it away.
If chunks of pigment are still being very stubborn, you can also use a pallet knife or metal scraper to gently lift them off. Make sure not to dig into or scratch the enamel surface of the palette.
Give the butcher tray a final wash in water, dry it off, and you’re good to keep on painting!
Solar is a transformative technology. Solar panels take something free and readily available — sunlight — and transform it into a valuable resource, electrical power. They do this with no moving parts and no direct greenhouse gas emissions. And they do it for 20+ years, with almost no maintenance — most panels require a wipe-down every few months, and that’s it.
Even better, solar now performs this remarkable alchemy very cheaply. A combination of tech advances leading to higher efficiency, better manufacturing processes, and scale (largely from Chinese producers) has driven the cost of solar down by 70% in the last decade. You can buy solar panels for a few dollars per watt or less— and that’s before generous tax credits in many countries, including the United States.
With atmospheric carbon reaching new highs every year — and climate change quickly becoming a lived reality instead of a concept — solar may be our best shot at achieving a cooler future.
But solar has a problem. As I’ll explain below, solar currently work at large and small scales, but not in the middle. I believe that another emerging technology — cryptocurrency — has the potential to bridge the gap and make solar a truly game-changing technology. I’ve been testing that theory since early 2019, and I’m pleased to report that in my proof-of-concept, pairing crypto with solar led to a 500% increase in earnings versus solar alone. Read on to learn more.
A Problem of Scale
Solar is an amazing technology, but from a business perspective, it currently suffers from a problem of scale.
On a very small scale — at the level of individual homes — solar works great. For an investment of around $20,000, you can place panels on your home, and take advantage of a process called “net metering” from your utility. With net metering, when your panels are generating power (usually 5–7 hours per day depending on where you live), your electric meter literally spins backward. At night or when it’s cloudy, you draw power from the grid, and your meter spins forward.
At the end of the month, you pay only for the “net” amount — the difference between what your panels generated and what you used. For the individual consumer — especially in a sunny state like California — this can work amazingly well. In many cases, you’ll pay nothing for electricity. And again, most panels today last 20–25 years. So for a reasonable initial investment (offset by tax credits in many cases), you can effectively eliminate your electric bill for decades.
Net metering is a great start, but there’s a problem. While you’re spinning your meter backward, your panels are effectively generating power at a very high price per kilowatt hour (KWH). Where I live in California, we pay up to $0.34 per kWh. So if you’re using solar instead of grid power in California, your panels are basically making you $0.34 per kWh. That’s enough to break even on the cost of the panels in just a few years and to save yourself a ton of money in the long run.
Spin your meter backward past zero, though, and everything changes. If you generate more power than you use, your utility will pay you for it. But the rates they pay are terrible. My utility, PGE, only pays $0.0315 per KWH for excess power generated during net metering. That’s a truly awful rate–you’d have to run your panels for decades just to break even, much less make a profit.
Because rates for excess power are so low, sizing a solar system is a balancing act. You want to generate enough power to offset all your usage–effectively earning money at high retail rates (again, up to $0.34 per kWh). But at the same time, you don’t want to generate too much. If you do, you’re selling power back to the utility at next to nothing, and essentially losing money in the process.
Again, due to net metering, solar works very well at the scale of a single home, but beyond that, there’s no opportunity to generate excess power and turn a profit.
On the other hand, solar works great at a very large scale, too. If you’ve ever driven up Interstate 5 in California or spent time in any sunny state, you’ve probably seen an industrial-scale solar farm.
These tend to consist of acres upon acres of solar panels, all oriented in the same direction and soaking up the sun. They’re kind of beautiful in a way, like a very high tech version of the farms or orchards of yore. Or something out of a science fiction movie — where the computers have learned to power themselves and have taken over the planet from their pesky, carbon-spewing human creators.
Solar farms generate huge amounts of power and are also hugely profitable. The power generated by solar at this large scale is now cheaper than power from many fossil fuels, and since panels last a long time, solar farms can generate lucrative power for decades.
The challenge with solar farms is that they’re incredibly hard to start. First, you need a ton of capital to buy land, and to cover it in thousands of panels. That’s tough to get, but not impossible. The harder part, by far, is getting permission to sell that power back to a utility.
Unlike with net metering, a solar farm can’t just plug in and start selling power back to the grid. Instead, they need a Power Purchasing Agreement with the utility in their area. This is a contract where the utility agrees to buy power from the farm for a certain amount of time, at a certain rate. Utilities are very stingy about handing these out — many have quotas or limits on the number of PPAs they’ll issue each year, and the process can require armies of lawyers, mountains of paperwork, and years of negotiation and permitting to get in place.
Once a PPA is in place, the owner of a solar farm is golden. The contracts last up to 30 years, and often pay rates of around $0.14 per KWH — more than 4 times the rate paid to net metering customers, and enough to turn a healthy profit over time. By getting a PPA, a farm owner has locked in decades of nearly guaranteed returns.
Again, though, getting these contracts is difficult and expensive. Securing them can take years, and cost thousands or millions of dollars. Sometimes solar projects never get off the ground at all, since it’s so challenging to get an agreement in place. And of course, you need the legal and industry expertise to even stand a chance of negotiating a PPA — this is not territory for the individual or even a small startup.
For that reason, solar farms really only make sense for companies with the funds and clout to successfully negotiate a PPA. And by the time you’ve won a PPA, you’ve likely already spent tens of thousands on the process. To recoup their costs, solar farms thus need to be very, very big. They really only work at a very large scale — megawatts or more. That’s way beyond what an individual, startup, or even mid-sized company can afford.
Why Don’t You Just Meet Me in the Middle?
Solar works great for individuals, and it works great for massive companies. But in the middle, there’s basically nothing. If you’re an entrepreneur or startup looking to profit from solar, the business model just isn’t there. You can’t make a profit selling power back to utilities at $0.0315 per KWH on a very small scale, nor can you afford the process of winning a PPA and locking in a $0.14 per KWH rate at the large scale.
Solar installations of 10–200 KW could be very affordable to build for small startups and even wealthy individuals. And they could be profitable, generating clean energy and recurring revenue for decades. But at the moment, if you build one, there’s no one to sell the power to.
For solar to truly take off as a transformative technology, there needs to be a middle ground. There needs to be a way for risk-loving startups, small companies, or individuals to install solar panels and earn a profit from the power they generate. This would open up solar to millions of entrepreneurs who would jump at a chance to create new passive revenue streams from their capital while helping to counteract climate change.
Ideally, there would be a way to generate power from solar, and immediately transform it into money. This method should work at a medium scale, with a sizable but reasonable initial investment — the kinda startup or well-to-do individual could raise. And this method should require limited to no permitting, and no need to negotiate purchasing deals with a utility or anyone else. You should turn the system on, the power should start flowing, and the money should start flowing, too.
With the birth of cryptocurrency mining, this possibility now exists.
For those who aren’t familiar, cryptocurrencies like Bitcoin and Ethereum are modern monetary equivalents built on a technology called the blockchain. While there are hundreds of cryptocurrencies out there, many of them work in the same basic way.
People, called “miners”, use their computers to solve a very challenging math problem. As they solve these problems, they are occasionally awarded a cryptocurrency coin. The blockchain allows everyone to see and verify who has been awarded coins. And once the coins are awarded, they can be sold or traded with others in the system — often for very large sums of fiat (read: actual) money.
The catch is that solving these math problems (which are based on a concept called hashing) is extremely hard. It requires computers to toil, day in and day out, 24/7 for days, weeks, or longer, often in groups, just to find a single coin. Doing this uses a lot of electrical power — worldwide, cryptocurrency mining uses more power than the country of Switzerland.
What mining computers do, though, is perform alchemy almost as impressive as solar’s. They take in electrical power as an input and create money. There’s no need to secure a buyer or have a contract with a third party. A mining computer anywhere in the world can enter the system, and through the power of the blockchain, any coins it mines can be immediately verified and awarded to its owner.
Solar and Crypto — a Perfect Pair
Cryptocurrency mining — I believe — unlocks a totally new business model for solar.
Remember, solar’s big issue is the lack of a middle — a method for players other than giant companies to generate electrical power from solar, and immediately convert that electrical power into money at a favorable rate. Crypto provides that method.
Here’s how a solar/crypto project would work. A startup with some decent funds (say $500k) to spend would buy land in a sunny area, and install solar panels. They would connect those panels to cryptocurrency mining computers. The computers would use the power right onsite to perform a mining operation, creating something of value — cryptocurrency coins — which the startup could then sell at a profit.
With a solar system in the 10s to 100s of kilowatts, a startup or even a wealthy individual could make good money. And because of how crypto works, there would be no need to negotiate complex deals with utilities in order to unlock profit from their system. They could switch the whole thing on, and be earning passive revenue the next day.
My Solar/Crypto Proof of Concept
When I started thinking about this business model, I didn’t want it to just be a theory. I wanted to see how it would perform in the real world. So I set about building myself a solar/crypto proof of concept (shoutout to Chris C and Brett R, who helped me think through these ideas and acted as a sounding board during testing).
On the solar side, I worked with Renogy, a high-end solar panel company, to source some panels. I ended up buying 250 watts worth of panels — a tiny system, but enough for a test — as well as the charge controllers, cabling, etc. to run them.
I also bought a battery, to test the idea of storing power generated during the day to run the system at night (more on that later).
I hooked the whole thing up and placed it in the California sunshine. In my area, we receive about 6–7 hours of sun per day, which is enough for a solid test. In practice, my 250 watts of panels generated about 200 watts of power, mostly due to some long cable runs, a cheapo charge controller, and some shading.
On the crypto side, I started by building a computer. For cryptocurrency mining, you don’t need much — a motherboard, processor, network card and power supply are enough. I used a Platinum rated power supply, for energy efficiency purposes.
What you’re really trying to do is provide a home for a graphics card, or GPU. These are the devices that do the heavy lifting of cryptocurrency mining. For my setup, I used an NVIDIA 1070.
To connect the two parts together, I got a 500 watt power inverter from Renogy. This takes the 12 volt output of the solar system, and transforms it into the 120 watts needed to run the computer.
For software, I installed Nicehash. Nicehash is great because it doesn’t require you to mine a specific cryptocurrency coin. Rather, it’s a marketplace for hashing power — the computing power required for mining. Buyers come to Nicehash to buy large amounts of hashing power for their own mining operations, and sellers like me come there to sell it. Nicehash handles payment, configuring the algorithms, etc.
I liked it for this test because it’s easy — you open the program, and it starts earning you money. I also like that it has the potential to diversify in the future — if cryptocurrency suddenly goes away, Nicehash could pivot into selling hashing power for other purposes (like AI training), and sellers like me could still earn money.
My Setup By the Numbers
After tweaking power settings using a program called MSI Afterburner, my computer draws about 170 watts while running full out mining cryptocurrency with Nicehash. Another way to put this is that in 1 hour of run time, it consumes .17 KWH. At the same time, during my test in mid-2019, it generated $0.0258 in cryptocurrency earnings per hour.
This means that the system is making about $0.16 per KWH from the power it generates.
Stop for a moment and think about that. By using solar and crypto together, I can make 500%+ more than what I would make selling power back to the grid via net metering. And I can even make about 15% more per KWH than if I had a solar farm and a complex PPA in place with my utility.
This setup requires no contract, no prior authorization, and not even a grid connection. I just set the whole thing up, placed it in the sunshine, and started earning.
I ran my solar/cryptosystem for about 3 months, just to see how it would do over a slightly longer time period. The numbers stayed consistent, and it ran with minimal maintenance. I wiped the panels down every week or so, and that was about it.
One challenge I ran into was running the system after dark. My solar panels, in full sun in California, generate about 65 amp-hours of power per day. 170 watts of power consumption from the computer is about 14 amps at 12 volts (170/12). That means the panels can run the computer for about 4.5 to 5 hours per day.
Ideally, you would want to run the computer all day, so it’s always mining and earning you money. This would require more panels, but it would also require a way to store the energy. To experiment with this, I connected up a lead-acid battery and used it to run the system for about an hour each day after the sun went down.
The challenge with running on battery power is that you need a lot of batteries to run 24/7. Even if you live in a place with 7 sun hours per day, you still need to run on batteries for the other 17 hours. At 14 amps of power draw, running the computer would require 14 * 17 = 238 amp-hours of battery capacity.
But there’s a catch — for longevity, you don’t want to drain lead-acid batteries below 50% charge. So you would really need at least 400 amp-hours of capacity. That’s about 3–4 large marine batteries, which gets bulky and adds expense.
That said, the contract-free $0.16 per KWH from solar and crypto is very compelling. I can see two different ways to scale this up. I’ll look at each one, considering a hypothetical 10KW solar system, and then a bigger system. This would be a reasonable size for an individual looking to diversify by generating passive income from solar for under $100k, or a startup with more to put in.
Solution 1: Full Off-Grid
One way to scale my system up would be to keep the basic concepts, but make it a lot larger. A big advantage of my proof-of-concept system is that it’s totally off-grid. This means no utility oversight at all, and depending on your jurisdiction, limited permitting, as long as you’re not connecting to a structure.
To scale this up, a solar entrepreneur could buy some land in a high-insolation (read: very sunny) area. The great news is that these areas tend to be dessert, so land is cheap. You can buy a few acres for less than $10k. Here’s a parcel for $6,000 a press timein Kern County, California, the highest insolation place in America.
You would then get off-grid panels, and set them up on the land. Let’s use a 10kw system to make things simple. The Solar Store sells panels by the pallet — three half-pallets of their Q Cell line would run you about $9,000, and provide 10.440 KW of power.
Kern County gets an average of 7.66 sun hours per day, which means in a year, you’d get 2,795 hours of sun. That means your panels would generate 10.44 * 2,795 = 29,179 kWh per year.
You’d then need enough mining hardware to take advantage of all that power. I throttled my computer down pretty far to stay within the 200 watts from my tiny solar setup, but running at more like 220 watts was ideal, and boosted my earnings up to about $0.185 per kWh. My computer, mining 24/7/365, consumes about 2,000 kWh per year. Most of that is to power the NVIDIA 1070.
To use all 29,000+ KWH generated by your off-grid panels, you’d need 15 1070s. At press time, they were running about $370 on Amazon. So that would be about $5,500. Add another $500 or so for a mining MOBO (the ASUS B250 can easily accommodate 15 GPUS) and some power supplies, and you’re at $6,000 total for computer hardware.
Remember, though, that you’d still have to run at night, so you’d need batteries as well. With 7.66 sun hours per day, you’d still need to get 16.34 hours of dark run time in each day. With 15 GPUs, your system would draw 220 * 15 = 3,300 watts or 275 amps at 12 volts. So to run all night, you would need a battery capacity of 275 * 16.34 = 4,493 amp-hours.
There will be conversion losses, power lost to charging and discharging, etc. And for maximum life, you don’t want to run your batteries all the way to empty. So let’s nearly double our AH requirement, adding 80% more capacity to leave plenty of margins. That means you’d need about 1.8 * 4,493 = 8,097 amp-hours. Big deep-cycle lead-acid batteries cost about $1 per AH of capacity, so that would add about another $8,100 to the system’s cost. Batteries are expensive!
The connect everything together, let’s throw in another $2,000 for charge controllers, cabling, inverters, mounting hardware, etc.
At this point, you would have a system that was totally off-grid, and could mine 24/7 with 15 different GPUS. The total system cost is:
$9,000 for panels
$6,000 for hardware
$8,100 for batteries
$2,000 for other equipment
How much would your system generate? Remember that in my testing, the system generated $0.185 per KWH with more generous power settings. That means you’d make 29,179 * .185 = $5,398 per year from the system.
In a little over 4.5 years, your entire system cost would be paid off. Run for another 1.5 years or so, and you’d have bought yourself a free parcel of land. Beyond that, all the earnings would be pure, passive profit. Typical break-even points for a commercial solar farm are 7–8 years, so with a 4.5-year timeframe, you’re already ahead of the game — even with the extra expense of the crypto hardware.
The great thing about this setup is that it scales really well. Depending on how much you had to spend, you could simply buy more panels, more GPUs, and more batteries to meet your needs.
Say you were a small startup instead of an individual, and you had $500k to work with. You could build a 200 KW system (~$25k for our 10kw system X 20. The payoff period would be the same, but after the system was paid off, it would bring in $107,960 per year in passive revenue. In theory, you could scale the system size up or down to match whatever size you wanted.
Solution 2: Bolt-on to Existing Solar
Another solution is to add crypto to an existing residential solar installation.
As I mentioned before, many homeowners install solar panels to offset their own power usage. But because they basically get peanuts for any energy generated beyond their real usage, most solar installers recommend only installing enough panels to meet the customer’s actual needs. This leaves unused capacity on millions of roofs around the world.
What if using crypto, this extra rooftop capacity could be leveraged? Let’s look at my home in California, for example. According to Google’s Sunroof calculator, I have about 899 sqft of usable roof space. Paying for my whole electric bill would require a 9.5 KW system, which would take up 669 square feet. A solar installer would tell me to install a 9.5 KW system, to meet but not exceed my actual needs.
But this still leaves 230 sqft of unused roof space. That’s enough room for another 3.3 KW of panels. What if I bought the extra panels, and used that spare electrical generation capacity to mine crypto?
Since this would be a grid-tied system, I’d have much less flexibility on sourcing, and would likely need to use a professional installer to meet the standards of my utility, and zoning requirements. The average cost of installed solar in the US is $2.99 per watt, so the extra 3.3KW would cost about $9,867.
But wait — because this is a residential installation, I can likely get a 30% tax credit from the Federal government in the US (phasing out over time, starting next year). So the actual cost for the panels would only be $6,906.
To stay consistent with Solution 1, let’s pretend my house is in Kern County. That means I would get 7.66 sun hours per day, yielding 9,226 KWH per year from my 3.3KW of extra solar panels. I would need a computer with about 5 NVIDIA 1070s to use all that power, which would add about $2,350 to the system’s cost (5 cards at $370 each, plus $500 for other components).
Here’s the great part. Unlike with an off-grid system, I wouldn’t need to include any funds for batteries. Since this would be grid-tied, I could use the grid itself like a giant, free battery. During the day, my extra panels would churn out lots of power, both running my mining computer and sending electricity flowing back to the grid to spin my meter backward (remember, net metering).
At night, my 1070s would continue to churn along and spin my meter forwards. In essence, I would build up a surplus of power during the day and then draw from that surplus to run at night. In the end, the extra power generated and the power taken from the grid at night would “net” out to zero. It would be just like storing power in a battery to run at night, but with no battery expense.
Another great feature of this system is that it would be very easy to set up. The cost of cabling, inverters, etc. is already included in the $2.99 per watt figure for professionally installed solar, so I wouldn’t need to account for these. I could literally plug my computer into the wall and let it run.
Ideally, I would probably go a bit beyond this, setting up monitoring software on the mining computer to throttle its power consumption and earnings up and down depending on the surplus power my panels were generating.
If it was a really sunny day, and my panels generated extra power, I could throttle power up to the 1070s, and earn a slightly higher rate. If it was cloudy for a while and I risked drawing too much power from the grid, the computer could throttle down the 1070s until the sun started shining again and I built up a surplus.
How would this system’s earnings look? The total system cost would be:
$6,906 for the extra panels
$2,350 for the mining computer setup
Again, the system would generate 9,226 KWH per year of extra power. At $0.185 per KWH, that works out to $1,706 per year. The system would be paid off in about 5.5 years and would generate profit from there out.
The challenge with this solution is that it’s harder to scale. It would work fine for one house, but to scale up, you’d either have to buy houses or work with other homeowners. The best way to scale it would probably be to work with a company that already does solar installations, like Sunrun or Sunpower. Homeowners who were already buying solar could opt to add a few extra panels, install a mining computer somewhere in their house, and reap the benefits of some extra passive income from their system.
Risks, and Ways This Could Fail
The biggest risk with all this is that it’s essentially a bet on crypto, and crypto is volatile. A drop in crypto prices means lower market prices for hashing power and thus lower earnings. Indeed, since my testing in mid-2019, crypto prices have dropped a bit, and my system today is only yielding about 9 cents per KWH. That’s still 280% more than the net metering rate, but it would mean a longer payoff time.
Of course, by the same token, if crypto prices increased, your system could be paid off much faster and could earn more. If crypto went back up to $20,000 per Bitcoin, where it was a few years ago, your system could be paid off in 1–2 years and yield up to 100% more going forward. But again, this requires at least some faith in the stability of the crypto markets and making a speculative bet that the coins will remain valuable long enough to break even on your equipment and earn a profit.
As crypto bets go, though, this is likely less risky (albeit way more labor-intensive) than just buying coins. If crypto prices plummeted (or markets were regulated away), you could still presumably sell your solar panels, GPUs and land, and recoup much of your cost. That’s harder to do with the coins themselves if things go sour.
Another risk is the depreciation of your equipment. Solar panels have a known lifespan, and it’s long. They’ll dutifully provide power for 20–25 years at least. And batteries — if well cared for — should provide power for at least 10 years, and possibly much longer.
Crypto mining hardware, though, is much more of an unknown. Those 1070s are great now, but in five years or more— as technology advances and crypto gets harder to mine — they could be much less efficient, and you could end up needing to replace them with newer GPUs, which adds cost.
The good news here is that the breakneck pace of hardware innovation in crypto is slowing down a bit — GPUs are holding up for longer, and some coins are becoming more resistant to dedicated mining hardware tailored to a specific coin, which gives more market share to GPUs.
Some miners have also had success “trading up” on their GPUs every few years by selling the old cards to gamers and using the proceeds to purchase new ones. Even after a year or two of use and depreciation, most GPUs are still plenty powerful enough for gamers, who apparently pay nearly full price on this kind of used hardware — and sometimes more, if the cards are scarce. This creates work, of course, but could provide a way to upgrade hardware as crypto advances without too much additional cost.
The systems I’ve laid out are pretty basic, and also pretty conservative on estimates. With tweaking and optimization, you could almost definitely get them yielding more. For example, you could mine coins directly rather than relying on Nicehash, cutting out their fees. You could tweak power consumption, and get a better mix of efficiency and mining profit. You could use dedicated ASICS or another coin-specific mining technology like an Antminer. Or you could add another clean energy technology — like wind — to bump power and profits up further.
New Models, New Opportunities
Solar feels like a magical technology — it’s that irresistible alchemy of getting something (valuable electricity) for nothing (free sunlight). That the panels are nearly maintenance-free and last for decades is the icing on the cake.
Again, though, solar has a problem of scale. There are lots of ways to use it today, including to save yourself money in your own home. But there are relatively few ways to make a profit from solar unless you’re a giant company with the people and time to pursue a PPA and develop a megawatt-scale solar farm.
Pairing solar with crypto opens up profit-making opportunities for much smaller players. A risk-loving startup, or even a private individual looking for a new source of passive income, could pair solar with crypto in the ways I’ve described and scale to their heart (and wallet’s) content. These systems are modular, so one could always dip their toe in, see how it works, and add capacity as the earnings materialize, or exit gracefully if they don’t. Crypto opens up solar as a business model, not just a savings tool for homeowners.
Providing solar with a “middle” makes is much easier and more profitable to adopt. And that’s good for everyone — solar equipment makers (who could produce cheaper panels with greater scale), solar entrepreneurs, and the planet.
This last piece is key. Again, crypto mining uses as much electrical power as the country of Switzerland each year. Moving more crypto mining over to solar is not only a great way to realize profits from solar power but also a great way to reduce the environmental impacts of cryptocurrencies as their reach and scale continue to grow.
Solar needs a middle, and I believe crypto could provide it. What do you think? Who’s tempted to build this?
California gets a lot of sun; where I live, we get about 9 months per year of continuously sunny days. In fact, it’s genuinely surprising when the weather isn’t sunny. And we’re not talking wimpy East Coast sun, either. The sun here is bright and strong, and there’s rarely any pesky clouds to interrupt it.
It’s a shame, then, that so much of the sunlight which falls on my house gets wasted. Solar, as you’d expect, is a big deal here, and lots of people make good money installing big 5kw+ units on their roofs.
My issue, though, is that I rent. My landlord probably wouldn’t be too thrilled if I started climbing around screwing things into the roof. And I’d have to stay in the same place for an awfully long time to recoup the investment involved with installing a solar system on someone else’s property.
Lately, though, I’ve been thinking about ways I could turn some of that constant California sunshine into free (or at least cheap) (or probably expensive, actually, but fun to generate) energy. Why not build a solar system that’s the right scale for an apartment?
Realistically, an apartment scale solar system probably wouldn’t save money, at least in the short term. Even in California, my average electric rate is only $0.18 per kilowatt hour, which is pretty hard to beat.
But there’s other reasons to have a solar system. In addition to sunlight, California also gets earthquakes, and they can cause extended power outages. It would be nice to have a way to generate power even without the grid. And there’s the general self-reliance aspect, which is nice too. Oh, and of course there’s the environment. That thing.
In thinking about designing an apartment scale solar system, a couple requirements come to mind. First, I would want it to operate without the grid. Net metering—where you buy power from the utility when your panels aren’t generating enough to supply your needs—is the trendy model these days. There’s even some plug in solar options (which claim UL certs but still look sketchy to me) that claim to do net metering for apartment dwellers. But these systems are required by law to shut down if there’s a power outage, so you don’t electrocute lineworkers from PGE, so they wouldn’t address the off-grid aspect.
Secondly, the system would have to be portable. It would need to be something you could move from property to property, so no fixed wiring, panels installed on the roof, etc.
Lastly, and probably most important, it would have to be seamless to use. I’m not about to go swapping out my lightbulbs for 12 volt models. And I know myself well enough to know that I’m too lazy even to have to unplug from one outlet and plug into another when the system wasn’t generating enough power. So my system would need to be automatic; it would use my existing appliances, and would run on solar when solar was available, but would switch to another power source (assuming one was available; see the off grid comments above) when the sun went down and the battery ran out.
So here’s what I came up with.
Panels and Charge Controllers
Renogy offers some really nice looking monocrystaline panels for cheap. They’re small enough to set up on your porch or deck, but efficient enough to generate some decent power output. $180 buys you a 100 watt kit, which includes the panels, cabling, and a PWM charge controller.
These are pretty easy. All I would need is a deep cycle 12 volt battery from Autozone. The RV models are designed to hold a bunch of juice, and can output lots of power over a long time without losing capacity.
A 60 amp hour battery runs about $120. Applying some basic high school physics, if my panels output 100 watts at 12 volts, that’s 8.33 amps. So a 60 amp hour battery would hold about 7.2 hours worth of California sunshine (and yes, I’m simplifying by ignoring charging losses and panel losses…sue me).
Here’s where things get interesting. Everything so far is pretty straightforward hardware. And the inverter could be too; you can get little car inverters which turn your 12v input into about 100 watts of AC output, for as little as $20. You could hook up one of these to your battery, plug in a lamp or something, and be done with it.
This is where the laziness comes into play, though. I would want my system to be automatic; more like the panels people put on their roofs than the hacked together systems Midwesterners put in their hunting cabins. So I don’t want an inverter where I have to physically unplug my appliances and plug them in elsewhere when the solar power runs out. I would want something which runs on solar when it’s there, but can move over to grid power when it’s not.
Luckily, there’s a model for this kind of operation. It’s a Uninterruptable Power Supply (UPS). People use them to power computers and TVs during intermittent outstages. A UPS has a battery, an inverter, and a connection to the wall. Under normal operation, the wall power powers the appliance plugged into the UPS, and also charges the battery. If the wall power is cut, the system switches (within a couple milliseconds) to the battery, giving your enough time to power down your computer safely, or finish your show.
My system would be like a UPS, but in reverse. It would run off the battery (charged by the Renogy panel) under normal conditions, but could instantly fail over to wall power if the battery ran out.
I’m not sure first one to have this idea. Like most things, countless people on the internet have been there first. Just type “solar UPS” into Youtube, and you’ll see what I mean. But I don’t want a solution which involves hacking a traditional desktop UPS. I want an apartment scale solar system, not a house fire. So what are the options?
Enter the APS750 inverter from Tripplite. It’s a beefy, commercial grade inverter which produces up to 2000 watts, and has lots of neat features, like filtered power output for running sensitive electronics. But most importantly, it has a UPS mode. You can plug it into wall power as well as a battery, and it will fail over to battery if the wall power is cut.
So how would I cut the wall power at will, keeping the system in a failure state by default so it can run off the battery/solar?
Enter the home automation portion of the project. I figure the best bet would be have an Arduino or similar board monitoring the voltage of my 12v battery using a simple voltage divider circuit. The Triplite inverter’s wall power plug would then go into a Powerswitch tail before connecting to the grid, and the Powerswitch tail would also go to the Arduino. The 12v input on the Tripplite would go to the battery.
When the Arduino detected that the battery voltage had reached a certain level, it would trigger the Powerswitch, cutting the grid power to the Triplite. The Triplite would think a power outage had occurred, and would instantly switch over to running off the battery (again, charged by the Renogy panel). Tada—instant solar system! When the battery got too low, the Arduino would turn the Powerswitch Tail back on, restoring grid power to the Triplite, and keeping my appliance running.
The whole thing would be very portable, as it would just be a bunch of self contained units plugged into each other; Renogy to Battery, Battery to Triplite, Triplite to Appliance and Wall. Nothing to short out or require professional installation. And there are a ton of things I could plug into it. My media center condenses a television, receiver, DVD player, Roku, and a couple floor lamps into a single plug, so it would be a great candidate.
All told, it would be $660 for this apartment scale solar system. Supposing it generated 100 watts of power for 8 hours per day, that would be 800 watt hours per day at 12 volts, or 66 amp hours, which translates to 717 watt hours per day at 120 volts (ignoring charging and conversion losses for now…again, sue me). That means .71 kwh per day, or $0.1278 worth of electricity saved. You would need to operate the system for 14 years, under absolutely perfect sun conditions (which don’t exist in reality, even in California) to recoup the cost.
So it wouldn’t exactly be saving a bunch of money. But there’s some good news; a system like this might be able to qualify for federal sustainable energy tax credits, which would take about 30% off the price.
And of course, the best reasons for building a system like this probably aren’t financial. A couple years back, before I was on the West coast, I experienced Hurricane Sandy and its lovely aftermath; a 4 day power outage which left my neighborhood pitch black at night. I was grateful to have an old car jumpstarter and an inverter, which I hacked into a system for powering some lights. Having the ability to go off grid is nice for situations like that. And it’s also nice just to know you have the option.
With all good things home automation related, there are a bunch of ways my apartment scale solar system could be expanded. You could always add more panels, or a larger battery, to increase the capacity. And you could find other ways to charge it, too. If your landlord is really nice, you might be able to justify a wind generator, which outputs a ton more power than a solar panel. And if not, there’s always a bicycle generator, which would let you make free power and improve your quads.
And of course, there’s a ton you could do if you were willing to go just a bit more hardcore. Swapping out your 120v lights for 12v light bulbs and then running them off your system would skip all the hassle of the inverter, and could give you some serious run time and power savings. And why stop there? Amazon all kinds of 12v appliances. Solar powered vacuum cleaner, anyone?
So that’s my idea for an apartment scale solar system. Now the big question is, should I actually build it?